Specific Permit Conditions Regulatory Guide
40 CFR 63, Maximum Achievable Control Technology (MACT)
40 CFR 63, Generally Available Control Technology (GACT)
40 CFR 60, New Source Performance Standards (NSPS)
Title 15A, North Carolina Administrative Code (NCAC)
The following table is to provide a specific permit conditions regulatory guide for both non-Title V and Title V facilities that are operating an air emission source(s) that is subject to a federal and/or state rule(s) and is either listed on the permit or is exempted from permitting requirements, and is listed on the "Insignificant / Exempt Activities" table attached to the air permit. This guide is to be used to assist the facility in understanding their compliance obligations with respect to emission standards, compliance monitoring, record keeping, and reporting requirements contained in specific MACT, GACT, NSPS, and NCAC rules.
NOTE: These regulatory guides do not necessarily address all applicable requirements. Compliance with an applicable federal and/or state rule is the responsibility of the facility.
MACT/GACT Sources |
Link to EPA Rules, Tools, and Other Information:
Link to DAQ Contacts:
| Promulgated Rule: | Source Category: | DAQ Regulatory Guide: |
|
|---|---|---|---|
| 40 CFR 63, Subpart BBBBBB (6B) |
Gasoline Distribution Bulk Terminals ONLY 11/5/2013 | doc | |
| 40 CFR 63, Subpart CCCCCCC (7C) |
Paint and Allied Products Manufacturing - condition No. 1 | doc | |
| Paint and Allied Products Manufacturing - condition No. 2 (Avoidance) | doc | ||
| 40 CFR 63, Subpart DDDDDDD (7D) |
Prepared Feed Manufacturing 8/27/13 | doc | |
| 40 CFR 63, Subpart HHHHHH (6H) |
Paint Stripping and Misc. Surface Coating Operations | doc | |
| 40 CFR 63, Subpart JJ (2J) |
Wood Furniture Manufacturing Operations - Short Condition | doc | |
| Wood Furniture Manufacturing Operations - Long Condition | doc | ||
| 40 CFR 63, Subpart JJJJJJ (6J) |
Industrial, Commercial, and Institutional Boilers - Liquid Fuel OR Biomass greater than or equal to 10 million Btu per hour (Existing Sources) 3/22/13 | doc | |
| Industrial, Commercial, and Institutional Boilers - Liquid Fuel, Coal, OR Biomass less than 10 Million Btu per hour (Existing or New Sources) 3/22/13 | doc | ||
| Industrial, Commercial, and Institutional Boilers - Liquid Fuel Category greater than or equal to 10 million Btu per hour using 0.5% limit (New Sources) 3/22/13 | doc | ||
| Industrial, Commercial, and Institutional Boilers - Avoidance Condition 40 CFR 63 Subpart 6J 3/5/13 | doc | ||
| 40 CFR 63, Subpart OOOOOO (6O) |
Flexible Polyurethane Foam Production and Fabrication | doc | |
| Slabstock Flexible Polyurethane Foam Production | doc | ||
| 40 CFR 63, Subpart VVVVVV (6V) |
Chemical Manufacturing Area Sources | doc | |
| 40 CFR 63, Subpart WWWWWW (6W) |
Plating and Polishing Operations | doc | |
| 40 CFR 63, Subpart XXXXXX (6X) |
Dry Abrasive Blasting | doc | |
| Machining | doc | ||
| Dry Grinding and Dry Polishing | doc | ||
| Spray Painting | doc | ||
| Welding | doc | ||
| 40 CFR 63, Subpart ZZZZ (4Z) |
Reciprocating Internal Combustion Engines - Non-emergency compression ignition greater than 500 Hp (Existing) 2/14/2013 | doc | |
| Reciprocating Internal Combustion Engines - Non-emergency compression ignition greater than 300 Hp but less than or equal to 500 Hp. (Existing) 2/14/2013 | doc | ||
| Reciprocating Internal Combustion Engines - Non-emergency compression ignition 300 Hp and less at area sources (Existing) 7/10/2013 | doc | ||
| Reciprocating Internal Combustion Engines - Emergency compression ignition located at an area source (Existing) 4/23/2013 | doc | ||
| Reciprocating Internal Combustion Engines - Emergency spark ignition located at an area source (Existing) 6/11/2013 | doc | ||
| Reciprocating Internal Combustion Engines - Avoidance Condition for Institutional Emergency (Existing) 4/3/2013 | doc | ||
| 40 CFR 63, Subpart ZZZZZ (5Z) |
Iron and Steel Foundries | doc | |
NSPS Sources |
| Promulgated Rule: | Source Category: | DAQ Regulatory Guide: |
|
|---|---|---|---|
| 40 CFR 60, Subpart EE (2E) |
Surface Coating of Metal Furniture | doc | |
| 40 CFR 60, Subpart OOO (3O) |
Quarry - Nonmetallic Mineral Processing Equipment | doc | |
| Non-quarry - Nonmetallic Mineral Processing Equipment | doc | ||
| 40 CFR 60, Subpart IIII (4I) |
Compression Ignition Internal Combustion Engines 6/28/2013 | doc | |
| 40 CFR 60, Subpart JJJJ (4J) |
Stationary Spark Ignition Internal Combustion Engines with Flow Chart 8/13/2013 | doc | |
| 40 CFR 60, Subpart TTT (3T) |
Spray Booths | doc | |
| 40 CFR 60, Subpart UUU (3U) |
Calciners and Dryers in Mineral Industries | doc | |
Share this page: