General Permits

General Permits

Under 15A NCAC 02Q .0310, DAQ may issue a permit to cover numerous similar facilities or sources provided the following conditions are met:

  1. There is no unique difference that would require special permit conditions for any individual facility; AND
  2. No unique analysis is required for any facility covered under the permit.

General Permits issued under 02Q .0310 shall identify criteria by which facilities or sources may qualify for the permit. The Director shall grant the terms and conditions of the permit to facilities or sources that qualify.

NOTE: If you apply for and receive a General Permit, you will be subject to enforcement action for operating without a permit if your facility or source is later determined not to qualify for the terms and conditions of the General Permit.

Source  Document
Emergency Generators

Application Forms  


Sample Permit  

Cotton Ginning

Application Forms  


Sample Permit  

Yarn Spinning Plants

Application Forms  


Sample Permit  

Concrete Batch Plants

Application Forms   


Sample Permit 


Sample Permit Review 


Concrete Production Modeling Rates  

(February 12, 2015 AQAB Memo)

Rock Quarries Exempt from NAAQS/SAAQS Modeling Exemption

Application Forms  


Sample Permit 


Model Fugitive Dust Control Plan 


Model Fugitive Dust Control Log 


Director's Call for Fugitive Dust Control Plans 


NOTE: The application and sample permit are specifically provided for rock quarries that qualify for and are requesting an exemption from air dispersion modeling. The qualification criteria for the modeling exemption are described in Section 9 of the application form provided. Facilities that are required to submit an air dispersion model should use the standard NC DAQ Permit Application Forms.

 

Additional Resources