North Carolina Analyzer Certification Status
North Carolina established November 1, 2008, as the mandatory start date for Electronic Authorization (E-Authorization) to replace the physical stickers that previously had been placed on the windshields of vehicles. An electronic authorization number (e-authorization) is assigned to each vehicle passing an inspection and appears on the inspection receipt. Electronic authorizations apply to both safety-only inspections and safety-emissions inspections.
The analyzers listed below all have been certified to handle electronic authorizations, as well as perform safety and safety-emission inspections. All Standalone OBDII and Upgraded BAR 97analyzers can perform OBDII (pronounced OBD 2) inspections on 1996 and newer gasoline powered vehicles and communicate with all of the OBDII interface protocols: J1850 PWM, J1850 VPM, ISO, KWP, 11 bit CAN and 29 bit CAN.
Manufacturer Marketing Contact Phone Number | Type of Analyzer | Analyzer Certification Status (See definitions at bottom of page) | |||
---|---|---|---|---|---|
Acceptance Testing | Beta Testing | Certified | Broadband Certified | ||
BL Innovare (BannaLogic) 855-233-8632 | Standalone and Standalone OBDII | January 20, 2010 | February 4, 2010 | April 1, 2010 | No |
Standalone OBDII VPN Broadband | October 17, 2022 | December 9, 2022 | January 9, 2023 | Yes | |
BOSCH Automotive Service Solutions (formerly SPX) Matt Fisher 269-544-3611 | Upgraded BAR-97 | July 30, 2008 | August 28, 2008 | September 25, 2008 | No |
Standalone OBDII | July 30, 2008 | August 28, 2008 | September 25, 2008 | No | |
Standalone OBDII (w/XP) | July 30, 2008 | August 28, 2008 | September 25, 2008 | No | |
EASE Diagnostics Ed Carter 704-821-2863 704-591-6740 | Standalone OBDII (w/XP) With Optional Wireless Interface | July 29, 2008 | August 19, 2008 | September 16, 2008 | No |
Standalone OBDII (w/XP) *(C1) With Optional Wireless Interface | July 29, 2008 | August 19, 2008 | September 16, 2008 | No | |
Standalone OBDII (w/XP) *(C2) With Optional Wireless Interface | July 29, 2008 | August 19, 2008 | September 16, 2008 | No | |
Standalone OBDII (w/Vista) With Optional Wireless Interface | August 25, 2008 | November 14, 2008 | April 2, 2009 | No | |
Standalone OBDII (w/7) With Optional Wireless Interface | March 14, 2012 | NA | June 8, 2012 | No | |
ESP David Lewis 1-800-695-4377 | Upgraded BAR-97 With Optional Wireless Interface | August 29, 2008 | September 24, 2008 | October 15, 2008 | No |
Standalone OBDII With Optional Wireless Interface | August 29, 2008 | September 24, 2008 | October 15, 2008 | No | |
OBDII Stand Alone with W10 | July 15, 2021 | September 1, 2021 | October 1, 2021 | No | |
OBDII VPN Broadband | October 11,2022 | November 14,2022 | December 19. 2022 | Yes | |
OBDII VPN Broadband | September 29, 2023 | September 29,2023 | October 25, 2023 | Yes | |
Opus Inspection (formerly SysTech) Mr. Chris Smith 1-866-OBD-TEST (1-866-623-8378) | Standalone OBDII | August 7, 2008 | October 8, 2008 | October 28, 2008 | No |
SnapOn 800-695-0650 | Standalone OBDII | August 18, 2008 | August 28, 2008 | October 16, 2008 | No |
Verizon Business by BanaLogic 1-888-333-0557 | Standalone | July 29, 2008 | September 23, 2008 | October 10, 2008 | No |
Standalone OBDII | July 29, 2008 | September 23, 2008 | April 23, 2009 | No | |
Worldwide 1-877-832-7664 (1-877-832-SMOG) | Upgraded BAR-97 | August 1, 2008 | August 28, 2008 | October 15, 2008 | No |
Standalone OBDII | August 1, 2008 | August 28, 2008 | October 15, 2008 | No | |
Standalone OBDII (w/2000) | August 1, 2008 | August 28, 2008 | October 15, 2008 | No | |
Standalone OBDII (w/XP) Wireless | September 4, 2008 | January 27, 2009 | March 18, 2009 | No | |
Standalone OBDII (w/7) | August 10, 2011 | October 12, 2011 | March 5, 2014 | No | |
Standalone OBDII (w/7) OIS -7500 (DAD) | June 29, 2015 | NA | July 27, 2015 | No | |
Standalone OBDII (w/7) VPN Broadband | February 14,2023 | March 20, 2023 | October 25, 2023 | Yes |
Definitions
Analyzer Certification Status (mm/dd/yyyy)
- Acceptance Testing: The date a prototype unit has been received by the State and is being evaluated by conducting an extensive set of simulated inspections.
- Beta Testing: The date when a limited number of production units has been approved for a 10-20-day field test.
- Certified: Date granted for unlimited installation.
Type of Analyzer
- "Upgraded BAR-97" is a BAR-97 idle analyzer that has been upgraded with hardware and software to perform OBDII testing. This machine also performs safety inspections. Idle testing ceased to be performed January 1, 2006.
- "Standalone OBDII" is a machine that performs safety and OBDII inspections (no idle testing).
- "Standalone" is a machine that performs only safety inspections. OBDII inspections cannot be performed in the "standalone" configuration.
Questions?
For more information, contact Dave Willis at 919-745-4322 or Dave.Willis@deq.nc.gov